Instructions / Assembly

Table Of Contents

LAG SCREW

5/16" X 1-1/2"

BRACKET ADJUSTER

5/16" WASHER

BEAM

FLANGE

TIGHTEN ALL BOLTS

AND NUTS

(SUB STEP 2)

NOTE: A 13mm SOCKET AND WRENCH ARE REQUIRED TO TIGHTEN ALL BOLTS

AND LAG SCREWS.

STEP 5: MOUNTING THE ADJUSTABLE GLIDER

BRACKET TO BEAM

1: ATTACH THE BRACKET ADJUSTER FLANGES TO THE BEAM WITH 5/16" X 1-1/2" LAG SCREWS AND

5/16" WASHERS.

2: PROCEED TO TIGHTEN ALL THE BOLTS AND NUTS FROM STEP 2 IN THE SIDES OF THE BRACKET

ADJUSTERS OF BOTH BRACKETS.