Instructions / Assembly
Table Of Contents

*FOR RESIDENTIAL USE ONLY*
*FOR CHILDREN AGES 3-11*
Adjustable Glider Brackets (11-4026-P)
REV: 1/5/2017
1: The Adjustable Glider Bracket set comes with the brackets and all of the hardware to fasten
them to a swing beam. The swing beam may be from 2-7/8" to 4-1/2" wide.
2: The brackets come with "hook style" hangers on each side. If your glider swing has chains or
rings then those should fit onto the hooks.
3: A distance of 8" should exist betwen the brackets and the support structure or an adjacent
swing. This is described in more detail on the pages that follow.
4: Safety comes first when swinging. Always obey the safety rules when swinging and when
walking around a swing set. We have included a Safety Tips Guide on page 2.
5: INSPECTION: At the beginning and at the end of every season check the tightness of all of
the fasteners on the brackets. Inspect the brackets for signs of wear or rust. Sand and then
touch up paint any rusty areas using a nonlead-based paint meeting the requirements of
16CFR 1303. If signs of excessive wear, cracking or other deterioration is present upon
inspection discontinue use and contact your dealer for replacement parts.
6: Adjustable Glider Bracket Weight Limit: 220lbs. per pair. Also, do not exceed the weight
limit of the swing beam.