Instructions / Assembly

Guide Tabs and notches shown in the diagram below.
5: Place the Rally Racing Wheel Cap Assembly over the Rally Racing Wheel and snap it into
the Rally Racing Wheel Insert.
Rally Racing Wheel (07-0034)
1: Place the Rally Racing Wheel Insert inside the Rally Racing Wheel.
2: Use the 3" lag screw and washer to fasten the Rally Racing Wheel to the board.
3: Place the Rally Racing Wheel Horn Inside the Rally Racing Wheel Horn Cap center Tabs.
4: The Rally Racing Wheel Cap Ring will slide over the Rally Racing Wheel Horn Cap using the
Please note: The Rally Racing Wheel is intended for make-believe-play by children.
*FOR RESIDENTIAL USE ONLY*
*FOR CHILDREN AGES 3-11*
Rally Racing Wheel
Cap Ring
4 x 4 board shown
(not included)
2-1/2"
Minimum
Rally Racing Wheel Horn
Rally Racing Wheel Cap Assembly
Washer
(22mm o.d. x 11.5mm i.d.)
(7/8" o.d. x 7/16" i.d.)
Lag Screw
(9.5mm x 76.5mm L)
(3/8" x 3")
Rally Racing Wheel Insert
Rally Racing Wheel
(11-1/4" diameter x 3-3/4" deep)
(Grip is 1-1/2" diameter)
Rally Racing Wheel Horn
Rally Racing Wheel Horn Cap
Rally Racing Wheel
Cap Ring
Rally Racing Wheel
Horn Cap
Center Tab
Guide Tab
Guide Notch