Instructions / Assembly

5/4 X 5 X 47-5/8"
TABLE TOP
5/4 X 5 X 47-5/8"
CENTER TABLE TOP
2" WOOD SCREW
CENTER HOLES IN
BOARDS OVER THE
CENTER OF THE 2 X 4 X
25-3/8" TOP LEG
SUPPORT.
ROUNDED OVER
HOLE EDGE ON
TOP.
TOP LEG SUPPORT
STEP 3: TABLE TOP
1: FIND ONE 5/4 X 5 X 47-5/8" CENTER TABLE TOP BOARD AND FOUR 5/4 X 5 X 47-5/8" TABLE
TOP BOARDS. THE CENTER BOARD WILL HAVE A HOLE DRILLED ON-CENTER IN THE MIDDLE OF
THE BOARD, AND ALL OF THE BOARDS WILL HAVE PRE-DRILLED HOLES IN EACH END.
2: CENTER THE HOLES IN THE CENTER TABLE TOP BOARD OVER THE CENTER OF THE TOP LEG
SUPPORTS AND ATTACH WITH 2" WOOD SCREWS IN THE PRE-DRILLED HOLES. MAKE SURE THE
HOLE AT THE CENTER OF THE BOARD HAS THE ROUNDED OVER EDGE FACING UP.
3: PLACE THE FOUR TABLE TOP BOARDS ON TOP OF THE TOP LEG SUPPORTS. SPACE THEM
EVENLY SO THAT THE BOARDS AT THE END OF THE TABLE TOP ARE FLUSH TO THE ENDS OF THE
TOP LEG SUPPORT. ATTACH EACH BOARD WITH 2" WOOD SCREWS IN THE PRE-DRILLED HOLES.