Instructions / Assembly

2 X 4 X 42"
CENTER LEG SUPPORT
2" WOOD SCREW
END OF CENTER LEG SUPPORT
FLUSH TO OUTSIDE SURFACE OF
SEAT SUPPORT.
ROUNDED HOLE EDGE FACES UP.
STEP 2: CENTER LEG SUPPORT
1: FIND THE 2 X 4 X 42" CENTER LEG SUPPORT. TAKE NOTE OF THE TWO HOLES DRILLED IN EACH
END OF THE BOARD. ALSO THE ROUNDED OVER EDGE ON THE LARGE HOLE AT THE CENTER OF
THE BOARD SHOULD FACE UP.
2: CENTER THE LEG SUPPORT UNDERNEATH THE SEAT SUPPORTS OF THE LEG ASSEMBLIES
CREATED IN THE PREVIOUS STEP. EACH END OF THE BOARD SHOULD BE FLUSH WITH THE OUTSIDE
SURFACE OF THE 2 X 4 X 42" SEAT SUPPORT. ATTACH THE LEG SUPPORT TO THE SEAT SUPPORTS
WITH 2" WOOD SCREWS IN THE PRE-DRILLED HOLES.