Instructions / Assembly

FILLER
WINDOW
1853D
(4 per board for all boards)
#8 X 1-1/2" Wood Screws
FILLER
CENTER
FLUSH
1853D
WINDOW
CENTER
FLUSH
WINDOW TOP PANEL BOARD
(BEVELED BOARD)
"
16
"
16
7
13
5
12
7
8
"
1853G
WINDOW VERTICAL
SUPPORT
ALL BOARDS FASTENED ON INSIDE
OF WINDOW TOP PANEL BOARDS
AND SWING BEAM MOUNT
REPEAT ON
INSIDE HERE
WINDOW
TOP PANEL
BOARDS
WINDOW
TOP PANEL
BOARD
SWING
BEAM
MOUNT
STEP 39: WINDOW CENTER FILLER/VERTICAL SUPPORT
1: MAKE MARKS ONTO THE INSIDE OF THE BOARDS AT 7/16" AND 13-5/16". PLACE THE TOP OF
THE WINDOW CENTER FILLER DOWN 7/16" FROM THE TOP OF THE WINDOW TOP PANEL BOARD
AND FASTEN.
2: PLACE THE BOTTOM OF THE WINDOW CENTER FILLER DOWN 13-5/16" FROM THE TOP OF THE
WINDOW TOP PANEL BOARD AND FASTEN.
3: LINE UP THE TOP END OF THE WINDOW VERTICAL SUPPORTS WITH THE TOP OF THE UPPER
WINDOW CENTER FILLER BOARDS. FLUSH EACH WINDOW VERTICAL SUPPORT TO THE END OF
THE WINDOW CENTER FILLER BOARDS. FASTEN EACH WINDOW VERTICAL SUPPORT.
4: REPEAT THIS PROCESS ON THE OPPOSITE SIDE OF THE PLAYSET.
70