Instructions / Assembly

SUPPORT

ROOF PEAK

ROOF SUPPORT

1853L

LEFT

1853J

THE COUNTERBORE ON THE

OTHER SIDE FACES DOWN.

1853M

ROOF SUPPORT

RIGHT

STEP 26: ROOF SUPPORTS

1: LAY THE ROOF SUPPORTS DOWN ON A FLAT SURFACE WITH THE COUNTERBORED HOLES

FACING DOWN. ALIGN THE ANGLED ENDS OF THE ROOF SUPPORTS FLUSH WITH ONE

ANOTHER.

2: PLACE A ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS AS SHOWN. THE EDGES

SHOULD BE FLUSH WHERE SHOWN BELOW.

3. CHECK THAT THE HOLES ARE 42-1/2" CENTER TO CENTER AS SHOWN BELOW.

4: FASTEN THE ROOF PEAK SUPPORT AS SHOWN.

5: REPEAT SUBSTEPS 1-4 TO MAKE ANOTHER ROOF SUPPORT ASSEMBLY.

FLUSH

DETAIL A

FLUSH

#8 x 2"

Wood

Screws