Instructions / Assembly

STEP 59: ATTACHING THE EXTREME TUBE SLIDE

LAG SCREW

4 X 4 RADRIDE POST

3/8" FENDER WASHER

OF YOUR SLIDE.

1: ASSEMBLE THE EXTREME TUBE SLIDE ACCORDING TO THE INSTRUCTIONS PROVIDED. SEE BELOW FOR PLACEMENT

2: ONCE IN PLACE, TIGHTEN ALL HARDWARE ON SLIDE.

3/8" X 3-1/2"

4 X 4 RADRIDE POST

BOARD AND THE 4 X 4 POST

THE FLANGE OF THE SLIDE

WASHER IN THIS HOLE.

WASHER

GOES IN BETWEEN THE 2 X 6

LAG SCREW AND 5/16"

3/8" X 3-1/2"

LAG SCREW

3/8" FENDER

INSERT A 5/16 X 3-1/2"

THE BOTTOM OF THE

OPENING SHOULD BE

FLUSH TO THE DECK.