Instructions / Assembly

5/16"

WASHER

LEFT

5/4 X 6 X 10-1/2"

2 X 4 X 35-1/2"

ROOF SUPPORT RIGHT

2 X 4 X 35-1/2"

ROOF SUPPORT

RIGHT

LEFT

ROOF SUPPORT

2 X 4 X 35-1/2"

SUPPORT

ROOF PEAK

SCREWS

2" WOOD

HEX BOLT

5/16" X 4-1/2"

2 X 4 X 35-1/2"

5/4 X 6 X 10-1/2"

ROOF PEAK

SUPPORT

STEP 33: ROOF SUPPORTS AND ROOF PEAK SUPPORT

1: WITH OFFSET HOLES DOWN, ATTACH THE 2 X 4 X 35-1/2" ROOF SUPPORTS TO THE FORT WITH 5/16" X 4-1/2" HEX

BOLTS AND 5/16" WASHERS. THE ROOF SUPPORTS SHOULD MEET IN THE MIDDLE TO FORM A RIGHT ANGLE.

2: PLACE THE 5/4" X 10-1/2" ROOF PEAK SUPPORT AGAINST THE ANGLED ROOF SUPPORTS AND FLUSH TO THE SIDES

OF THE ANGLED ROOF SUPPORTS. FASTEN THE ROOF PEAK SUPPORT TO THE ANGLED ROOF SUPPORTS WITH 2"

WOOD SCREWS. REPEAT ON THE OTHER SIDE.