Instructions / Assembly

1 X 6 X 17"

PANEL SLAT

(ON THIS SIDE SPACING IS ABOUT 1" APART BETWEEN THE SLATS. SPACING

BETWEEN EACH CORNER POST AND SLAT IS ABOUT 1-1/4". )

1 X 6 X 17"

PANEL SLAT

(ON THIS SIDE SPACING IS ABOUT 13/16" APART

BETWEEN SLATS.)

1-1/2"

WOOD

SCREW

PANEL

BOARD

SAFETY

BOARD

1 X 6 X 17"

PANEL SLAT

(CENTERED BETWEEN POST

AND SUPPORT.)

NOTE: ROCK WALL AND LADDER REMOVED FOR CLARITY.

1: FIND FIFTEEN 1 X 6 X 17" PANEL SLATS.

2: PRE-DRILL SLATS WITH TWO EQUALLY SPACED HOLES 1" FROM EACH END WITH A 1/8" DRILL BIT.

3: ATTACH PANEL SLATS ALONG THE SAFETY BOARD AND PANEL BOARD EQUALLY SPACED.

4: ATTACH EACH PANEL SLAT USING FOUR 1-1/ 2" WOOD SCREWS.

STEP 51: BOTTOM PANEL SLATS