Instructions / Assembly

2 X 4 X 31"

BENCH SUPPORT BOARD

SANDBOX BOARDS

2-1/2" WOOD SCREWS

2 X 4 X 30" PICNIC TABLE

VERTICAL SUPPORT

(ON REAR OF PLAYSET)

2 X 4 X 30" PICNIC TABLE

VERTICAL SUPPORT

(ON FRONT OF PLAYSET)

2 X 4 X 78"

PANEL BOARD

2-1/2" WOOD SCREW

15"

17-3/4"

REAR VIEW

1: PLACE EACH OF THE 2 X 4 X 30" PICNIC TABLE VERTICAL SUPPORTS 15" OVER FROM THE CORNER POSTS. (SEE

REAR VIEW)

2: MAKE SURE THE PICNIC TABLE VERTICAL SUPPORTS ARE SQUARE TO THE SANDBOX BOARDS. ATTACH THEM TO

THE SANDBOX BOARDS FROM THE INSIDE USING TWO 2-1/2" WOOD SCREWS. ATTACH THE PICNIC TABLE

VERTICAL SUPPORT (ON FRONT OF THE PLAYSET) TO THE 2 X 4 X 78" PANEL BOARD USING THREE 2-1/2" SCREWS.

3: NEXT FIND THE 2 X 4 X 31" BENCH SUPPORT BOARD.

4: MEASURE 17-3/4" FROM THE BOTTOM OF THE

REAR

SANDBOX BOARD AND MAKE A MARK ON THE

REAR

CORNER POST AND THE

REAR

PICNIC TABLE VERTICAL SUPPORT. ALIGN THE TOP OF THE BENCH SUPPORT BOARD

WITH THE MARKS. LEAVE 8" OF THE BENCH SUPPORT PROTRUDING PAST THE CORNER POST.

5: USE SIX 2-1/2" WOOD SCREWS TO ATTACH THE BENCH SUPPORT BOARD TO THE CORNER POST AND THE PICNIC

TABLE VERTICAL SUPPORT.

STEP 48: PICNIC TABLE

NOTE: ROCK WALL REMOVED FOR CLARITY.