Instructions / Assembly

11-1/2"
31-1/2"
1 X 6 X 51"
REAR PANEL
SLAT
1 X 6 X 51"
REAR PANEL
SLAT
1 X 4 X 51"
REAR PANEL
SLAT
REAR TOP PANEL BOARD
1-1/2" WOOD
SCREW
(6 PER BOARD)
1: FIND FOUR 1 X 6 X 51" REAR PANEL SLATS AND TWO 1 X 4 X 51" REAR PANEL SLATS.
2: PRE-DRILL THE SLATS 1" FROM EACH END WITH TWO HOLES EQUALLY SPACED WITH A 1/8" DRILL BIT
3. INSTALL THE PANEL SLATS AS SHOWN BELOW.
4: ATTACH THE PANEL SLATS TO THE FORT WITH 1-1/2" WOOD SCREWS IN THE PRE-DRILLED HOLES.
5: ONCE THE PANEL SLATS ARE INSTALLED DRILL TWO HOLES IN THE MIDDLE OF EACH SLAT AND ATTACH TO THE
REAR TOP PANEL BOARD WITH 1-1/2" WOOD SCREWS.
ROOF PANELS REMOVED FOR CLARITY.
VIEW WITH DIMENSIONS IS FROM FRONT OF FORT LOOKING TOWARDS REAR.
STEP 37: REAR PANEL SLATS
70