Instructions / Assembly

ADJUST IN OR OUT.ADJUST IN OR OUT.
ADJUST IN OR OUT.
STEP 27: LEVEL SWING BEAM
1: PLACE A LEVEL ON TOP OF THE SWING BEAM AND ADJUST THE BEAM LEGS IN OR OUT
AS NEEDED TO MAKE THE SWING BEAM LEVEL.
IMPORTANT NOTE:
THE LEGS ARE DESIGNED TO
ACCOMODATE SWING BEAMS ON
UNEVEN GROUND (DOWN SLOPE).
THEY ARE LONGER THAN REQUIRED.
IF YOUR GROUND IS RELATIVELY LEVEL,
YOU MAY EITHER:
A) DIG IN BOTH LEGS WHERE THEY MEET
THE GROUND.
OR
B) BEND THE LEGS OUT SLIGHTLY TO
MATCH YOUR GRADE.
60