Instructions / Assembly

1 X 6 X 16"

TIC TAC TOE SUPPORT

1-1/2" WOOD SCREW

16-13/16"

16.000

2.000 4.000

1.500

5.500

.125

DIAMETER 4 PLACES

1:FIND TWO 1 X 6 X 16" TIC TAC TOE SUPPORT SLATS.

2: PRE-DRILL THE SLATS 2" FROM EACH END, AND 4" OVER FROM THE FIRST HOLE AS SHOWN ON THE DIAGRAM

USING A 1/8" DRILL BIT.

3: INSTALL THE SLATS IN THE GAP LEFT FROM THE PREVIOUS INSTALLATION LEAVING A 3/4" GAP ON THE END.

4: ATTACH THE PANEL SLATS TO THE FORT WITH 1-1/2" WOOD SCREWS IN THE PRE-DRILLED HOLES LEAVING A

16-13/16" OPENING BETWEEN THE TIC TAC TOE SUPPORT SLATS.

STEP 21: TIC TAC TOE SUPPORT