Instructions / Assembly

29.750
4 X 4 X 26"
CENTER LAG
POST
2" WOOD SCREWS
LOOKING
BACK
TO
FRONT
LADDER
1 X 4 X 25"
FRONT
PANEL SLAT
29.750"
3" WOOD SCREWS
1: FIND ONE 1 X 4 X 25" FRONT PANEL SLATS AND ONE 4 X 4 X 26" CENTER POST.
2: PREDRILL THE SLAT 1" FROM EACH END WITH TWO HOLES EQUALLY SPACED WITH A 1/8" DRILL BIT
3: INSTALL THE PANEL SLAT AS SHOWN ON THE FIGURE BELOW AND ATTACH WITH 2" WOOD SCREWS.
4: PLACE THE 4 X 4 X 26" CENTER POST 29-3/4" AWAY FROM THE LEFT FRONT CORNER POST AS SHOWN.
5: ATTACH THE CENTER POST TO THE TOP PANEL BOARD WITH TWO 3" WOOD SCREWS. GO UNDERNEATH THE DECK
TO ATTACH THE CENTER POST TO THE DECK BOARD WITH THREE 3" WOOD SCREWS.
STEP 19: FRONT PANEL SLATS
52