Instructions / Assembly

A
2 X 4 X 18"
ANGLE
SUPPORT
2 X 4 X 13"
ANGLE
SUPPORT
DETAIL A
SCALE 1 : 8
2 X 4 X 18"
ANGLE
SUPPORT
2 X 4
DECK
SUPPORT
2 X 6
BOTTOM
PANEL
BOARD
2 X 4 X 13"
ANGLE
SUPPORT
TOP OF ANGLE SUPPORTS
SHOULD BE FLUSH OR LOWER
THAN THE DECK SUPPORT
MOVE THIS ANGLE
SUPPORT DOWN TO
AVOID OVERLAPPING
THE HOLE.
DETAIL B
SCALE 1 : 8
2-1/2" WOOD SCREW
3" WOOD SCREW
2" WOOD
SCREW
2" WOOD
SCREW
3" WOOD
SCREW
2 X 4 X 13"
ANGLE
SUPPORT
2 X 4 X 18"
ANGLE
SUPPORT
2 X 6
BOTTOM
PANEL
BOARD
STEP 7: ANGLE SUPPORTS
1: FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE LEFT AND RIGHT SIDES OF
THE PLAY SET TO THE 2 X 6 BOTTOM PANEL BOARDS. THE TOP OF THE ANGLE SUPPORT SHOULD BE FLUSH OR
LOWER THAN THE TOP OF THE DECK SUPPORT.
2: AT THE TOP USE TWO 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE ANGLE SUPPORT. AT
THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE SUPPORT TO THE CORNER
POST.
3: FOUR 2 X 4 X 18" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE FRONT AND REAR OF THE
PLAY SET TO THE 2 X 4 DECK SUPPORTS. THE TOP OF THE ANGLE SUPPORT SHOULD BE FLUSH OR LOWER THAN
THE TOP OF THE DECK SUPPORT.
4: AT THE TOP USE TWO 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE ANGLE SUPPORT. AT
THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE SUPPORT TO THE CORNER
POST.
40