Instructions / Assembly

STEP 25: BOARD REMOVAL
1: REMOVE THE 2 X 4 AT THE TOP LEFT AS SHOWN BELOW.
2: REMOVE THE 2 X 6 AT THE MIDDLE LEFT AS SHOWN BELOW.
3: USE A 5/16" X 3-1/2" HEX BOLT AND A 5/16" WASHER TO FILL THE FOUR HOLES WHERE
THE 2 X 4 AND 2 X 6 WERE ATTACHED.
SET IT ASIDE FOR FUTURE USE.
REMOVE THIS 2 X 4.
REMOVE THIS 2 X 6.
SET IT ASIDE FOR FUTURE USE.
USE A 5/16" X 3-1/2" HEX
BOLT AND A 5/16" WASHER
TO FILL THE FOURHOLES
WHERE THE 2 X 4 AND 2 X 6
WERE ATTACHED.
123