Instructions / Assembly

A
C
B
STEP 14: BRIDGE RAILS
D
1: PLACE THE TOP SURFACE OF THE UPPER TWO 2 X 4 X 66" BRIDGE RAILS 5-1/2" BENEATH THE TOP SURFACE
OF THE TOP PANEL BOARD. THE COUNTERSUNK HOLE IN THE END OF THE BRIDGE RAIL SHOULD FACE THE
INSIDE. FASTEN THE BRIDGE RAIL TO THE CORNER POST WITH 5/16" X 3-1/2" LAG SCREWS WITH 5/16"
WASHERS.
2: MEASURE 16" FROM THE TOP OF EACH BRIDGE RAIL AND MAKE A PENCIL MARK ON THE INSIDE OF THE
CORNER POSTS.
3: PLACE THE BOTTOM OF EACH LOWER 2 X 4 X 66" BRIDGE RAIL ON THE MARK ON THE CORNER POST.
FASTEN EACH BRIDGE RAIL TO THE CORNER POST WITH 5/16" X 3-1/2" LAG SCREWS WITH 5/16" WASHERS.
OF
FRONT
2 X 4 X 66"
BRIDGE RAIL
LAG SCREW
EACH END.
COUNTERSUNK HOLES
FACE THE INSIDE IN
5/16 X 3-1/2"
5/16" WASHER
TOWER
HOLES FACE
THE INSIDE)
(COUNTERSUNK
NOTE: SOME BOARDS
HAVE BEEN OMITTED
FROM THE PICTURE
FOR CLARITY.
16.00
5.50
BRIDGE RAIL
TOP PANEL BOARD
112