Instructions / Assembly

STEP 48: ROOF SUPPORTS

1: Place the Roof Support Assembly directly underneath the previous installed Roof

Support Assembly.

2: The boards used as spacers should be flush to the bottom of the UPPER Roof Supports.

3: Fasten the Roof Support Assembly to the corner posts with 5/16" x 3-1/2" lag screws

and 5/16" washers.

Washer

5/16"

5/16" x 3-1/2"

Lag Screw

Roof Support (UPPER)

Each spacer board should be flush

to the bottom of the Roof Support

above it prior to installing lag screws.