Instructions / Assembly

A
Top Panel Board
4 x 4 x 32"
Extreme Slide Post
B
Surfaces
should be
flush
5/16" x 4-1/2"
Hex Bolt
DETAIL A
Extreme Slide Post
5/16"
Washer
T-nut
Top Panel Board
STEP 40: EXTREME SLIDE POSTS
1: Hammer a T-nut into the hole at the top of each 4 x 4 x 32" Extreme Slide Post.
2: Place each post on top of the deck spacer and fasten them to the top panel board
with a 5/16" x 4-1/2" hex bolt and 5/16" washer.
3: Make each post square to the deck spacer. Make the outside of each post flush to
the outside of each 90" post.
4: Secure the bottom of each post to the deck spacer with two #8 x 3" wood screws.
DETAIL B
Spacer
#8 x 3"
Wood Screw
Deck
Extreme Slide Post
82