Instructions / Assembly

INSIDE OF POST

END FLUSH TO

LEFT

REAR

POST

2 x 4 x 19-3/8"

Deck Support

(OFFSET DOWN)

2 x 4 x 19-3/8"

Deck Support

(OFFSET DOWN)

5/16" x 3-1/2"

Lag Screw

Ladder or

Rock Wall

at FRONT

5/16" Washer

STEP 34: DECK SUPPORTS

1: Measure 9" up from the deck onto the left rear corner post. Make the top of the

Deck Support flush to the mark.

2: Make the end of the Deck Support flush to the inside of the corner post.

3: Mark through the hole onto the corner post. Predrill a 9/64" hole by 2" deep into the

post. Place the Deck Support back into place with the holes offset down. Secure the

Deck Support to the corner post with a 5/16" x 3-1/2" lag screw and a 5/16" washer.

4: Repeat substeps 1-3 for the other Deck Support.