Instructions / Assembly

3/8" WASHER

3/8" X 3-1/2"

LAG SCREW

2 X 4 X 58"

SWING LEG

CROSS-MEMBER

STEP 32: SWING LEG CROSS-MEMBER

1: Position the 2 x 4 x 58” Swing Leg Cross-Member against the Swing Legs.

2: Level the Swing Leg Cross-Member and mark through the holes onto the swing legs.

3: Drill 11/64" holes by 2" deep at each mark.

4: Secure the Cross-Member to the Swing Legs with 3/8” x 3-1/2” lag screws and 3/8” washers.