Manualshelf

Instructions / Assembly

ManualsBrandsGorilla Playsets ManualsPlayground SetsNantucket Deluxe Wooden Playset with Tube Slide, Rock Climbing Wall and Accessories
71727374757677787980
BOLT CAP
LAG SCREW
3/8" WASHER
3/8" LOCK NUT
3/8" X 3-1/2"
3/8" WASHER
TORQUE WASHER
SWING BEAM
3/8 X 9" CARRIAGE BOLT
SWING BEAM
PLATE
STEP 30: SWING BEAM TO FORT
*An extra person is required for this step.
1: Have one person line up the hole in the end of the Swing Beam with the middle hole on
the Swing Beam plate. The other person may have to carry the other end where the legs are
located to accomplish this task.
2: Fasten the Swing Beam to the Swing Beam Plate and Swing Beam Support using a 9”
carriage bolt with a torque washer on top and a 3/8” lock nut and washer on the bottom.
Place green bolt caps over exposed threads after securing.
3: Fasten the Swing Beam to the Swing Beam Plate from underneath with a 3/8” x 3-1/2” lag
screw and a 3/8” washer.
71