Instructions / Assembly

3/8" LOCK NUT

DETAIL A

SWING HANGER

TORQUE WASHER

IRON DUCTILE

3/8" WASHER

STEP 27: IRON DUCTILE SWING HANGERS

BOLT CAP

Place bolt caps over exposed threads after securing.

3/8" X 7" CARRIAGE BOLT

bottom.

1: Line up the holes of the Iron Ductile Swing Hangers with the holes in the Swing Beam.

2: Fasten the Iron Ductile Swing Hangers to the Swing Beam using 3/8” x 7” carriage bolts with

torque washers on top of the Swing Beam, and 3/8” lock nuts with 3/8” washers on the

4 X 6 X 108" SWING BEAM