Instructions / Assembly

PANEL SUPPORT

2" WOOD SCREW

PANEL SUPPORT

2" WOOD SCREW

5/4 X 3 X 28"

PANEL SLAT

(7 PIECES AT RIGHT

SIDE)

STEP 23: PANEL SLATS

1: Locate eleven 5/4 x 3 x 28” Panel Slats. Four Panel Slats will be installed at rear of the play

set. Seven Panel Slats will be installed at the right of the play set.

2: At the right of the play set center one Panel Slat over the center of each deck board.

Square each Panel Slat to the Panel Support. Attach each Panel Slat to the inside of the

Panel Supports with two 2” wood screws for each Panel Slat.

3: At the rear of the play set place one Panel Slat flush with the end of the 2 x 4 x 12” Bottom

Panel Board. Square the top of the Panel Slat with the Panel Support or Panel Board. Attach

the Panel Slat to the Panel Board/Panel Support with two 2” wood screws. Center another

Panel Slat between the one you just installed and the corner post. Attach the Panel Slat with

two 2” wood screws.