Instructions / Assembly

5/16" Washer

5/16" X 4-1/2"

2 X 4 X 47-3/8"

Board - LEFT

Bottom Panel

Rock Wall Side Top Panel Board

Hex Bolt

5/16" Washer

(OFFSET HOLES UP)

2 X 4 X 12"

(OFFSET HOLES UP)

2 X 4 X 12"

Bottom Panel

Board - RIGHT

(OFFSET HOLES UP)

**NOTE: IF YOU ARE BUILDING THE PLAYSET WITH THE

ROCK WALL ON THE FRONT THEN PROCEED TO STEP 21A.**

FRONT

Lag Screw

5/16" X 3-1/2"

STEP 21: PANEL AND PANEL SUPPORT BOARDS

1: Place the 2 x 4 x 12” Bottom Panel Board - Left and 2 x 4 x 12” Bottom Panel Board - Right

on top of the 2 x 4 as shown below with offset holes up. Attach each Bottom Panel Board

with one 5/16” x 3-1/2” lag screw and 5/16” washer.

2: Place the 2 x 4 x 47-3/8” Rock Wall Side Top Panel Board against the rear of the play set

with offset holes up. Attach the Panel Board with two 5/16” x 4-1/2” hex bolts and 5/16”

washers.