Instructions / Assembly
X
DECK
X
X
Q
X Q
Q
SUPPORT
Q
DECK
SUPPORT
A
SCREW
2" WOOD
SCREW
2-1/2" WOOD SCREWS
3" WOOD
SUPPORT
DECK
DETAIL A
SCALE 1 : 8
X
2-1/2" WOOD SCREWS
SCREW
3" WOOD
Q
2" WOOD
SCREW
PANEL
SUPPORT
STEP 20: ANGLE SUPPORTS
1: Four 2 x 4 x 13” Angle Supports are mounted underneath the deck on the left and right of the fort.
(These are called out by the letter “X”)
2: Attach each Angle Support (X) to the Deck Support with two 2-1/2” wood screws at the top going
through the Deck Support first and then into the Angle Support (X). Attach the bottom of the Angle
Support (X) to the corner post with one 2” wood screw and one 3” wood screw.
3: Four 2 x 4 x 13” Angle Supports are mounted underneath the deck on the front and rear sides of the
fort. (These are called out by the letter “Q”)
4: Attach each Angle Support (Q) to the Panel Support with two 2-1/2” wood screws at the top going
through the Angle Support (Q) first and then into the Panel Support. Attach the bottom of the Angle
Support (Q) to the corner post with one 2” wood screw and one 3” wood screw.
60










