Instructions / Assembly

STEP 18A: ATTACHING ROCK WALL ON FRONT

1: Place the 4 x 4 x 21-1/16" Rock Wall Mount 2" away from the side of the left front

corner post. The top of the mount should be flush to the top of the deck.

2: Fasten the Rock Wall Mount to the panel support with six #8 x 3" wood screws.

3: Place the Rock Wall over the Rock Wall Mount. Center the hole in the Rock Wall Side

vertically on the mount. Predrill 3/16" holes 2" deep into the Rock Wall Mount using the

holes in the Rock Wall sides as a guide.

4: Install 5/16" x 3-1/2" lag screws with 5/16" washers in the Rock Wall Sides to fasten the

Rock Wall to the mount.

vertically on mount.

Mount

Center lag screw

Side View

5/16"

Lag Screw

Washer

Front

5/16" x 3-1/2"

Panel

Support

Flush

Rock Wall

Side

4 x 4 x 21-1/16"

Rock Wall Mount

#8 x 3" Wood Screws (6)

UNDERSIDE VIEW