Instructions / Assembly

5/16" WASHER

5/16" T-NUT

DETAIL C

5/16" X 1-1/2"

HEX BOLT

3/4"

SOME BOARDS

NOTE:

VIEW FOR CLARITY.

REMOVED FROM

5/16" T-NUTS

(PUT IN BACK SIDE OF HOLE)

brackets to the 2 x 4 with two 5/16" x 1-1/2” hex bolts and two 5/16”

washers.

3: Insert 5/16” t-nuts in the back of the holes.

STEP 18: ATTACHING ROCK WALL ON REAR

4: Attach the 90

1: The Rock Wall attaches to the rear of the play set, 11-3/4” from the outside edge of the

rear corner post.

2: Make sure the Rock Wall is level. The bottom edge of the 90 brackets should be 3/4” up

from the bottom edge of the 2 x 4. Mark the position of the bracket holes on the 2 x 4. Drill

3/8” holes where marked.

NOTE: IF YOU ARE ATTACHING THE ROCK WALL ON THE FRONT OF THE PLAYSET PROCEED TO STEP 18A NOW.