Instructions / Assembly

2 x 4 x 11"
T-Nut
5/16" x 4-1/2"
Hex Bolt
Lag Screw
5/16"
5/16" x 3-1/2"
Extreme Bottom Panel Board
Washer
5/16"
Washer
STEP 81: BOTTOM PANEL BOARD
1: Hammer a t-nut into the hole in the corner post as shown.
2: Fasten the 2 x 4 x 11" Extreme Bottom Panel Board to the corner post with a 5/16" x 4-
1/2" hex bolt and a 5/16" washer.
3: Level the board and install a 5/16" x 3-1/2" lag screw with 5/16" washer in the last hole.
4: Repeat this process for the panel board on the other side of the slide.
2 x 4 x 11"
Extreme Bottom
Panel Board
2 x 4 x 11"
Extreme Bottom
Panel Board
125