Instructions / Assembly
STEP 80: TUBE SLIDE
1: Build the Tube Slide according to steps 1 through 9 in the instruction manual included 
with the slide.
2: Rest the bottom of the slide entry upon the arched board or rock wall side top panel 
board. Center the slide left to right on the posts.
3: Fasten the slide entry along the sides and bottom with 1/4" x 2" lag screw and 1-1/4" 
fender washers.
Posts
Washer
1-1/4"
Lag Screw
1/4" x 2"
NOTE: WE RECOMMEND PREDRILLING ALL LAG 
SCREW HOLES WITH A 3/32" DRILL BIT PRIOR TO 
INSTALLING THE LAG SCREWS.
FRONT OF
PLAYSET
Arched Board 
(If ladder is on front)
Rock Wall Side Top
Panel Board
(If ladder is on rear)
124










