Instructions / Assembly

STEP 77: GROUND STAKES
1: Hammer a Ground Stake into the earth next to each swing leg at an angle. Do not
hold the upper portion of the stake after the first couple of hits or it may vibrate harshly
against your hand. If the top part of the stake twists when it encounters a rock or root
you may have to bend the top portion of the stake against the swing leg. Finally install
the screw and washer.
2: Attach each Ground Stake to the swing leg with a #14 x 2" pan head screw and a
1/4" fender washer provided with the Ground Stake.
3: Two more Ground Stakes will be on the inside of the sandbox on the two middle
corner posts. On the inside of the base of the play set drive the Ground Stakes into the
ground at a distance that will not interfere with the hex bolts that are installed in the
sandbox boards. Attach each Ground Stake with a #14 x 2" pan head screw and a
1/4" fender washer provided with the Ground Stake.
#14 x 2" Pan Head Screw
1/4" Fender Washer
Ground Stake
Ground Stake
#14 x 2" Pan Head Screw
1/4" Fender Washer
Ground Stake
#14 x 2" Pan Head Screw
1/4" Fender Washer
on the inside of this corner
post (partially hidden from view).
121