Instructions / Assembly

Wood Screw

#8 x 2"

5/4 x 6 x 20"

Vertical Window Support

5/4 x 2-1/4" x 11-1/2"

Horizontal Window

Support

#8 x 2"

Wood Screw

FRONT OF PLAYSET ON THE INSIDE

Center Post (beside ladder

or rock wall)

Window sits on top of this 2 x 4.

The lower portion of the frame is taller than 1".

This upper portion of the frame is 1" tall. It is the TOP.

Window overlaps vertical window support.

FRONT OF PLAYSET

Center Post (beside ladder

or rock wall)

STEP 65: WINDOWS

1: Center the 5/4 x 6 x 20" Vertical Window Support 5/16" above the center post beside the ladder or rock

wall at the front of the playset. Fasten it at the top and bottom with #8 x 2" wood screws.

2: Place a window on top of the 2 x 4 at the front of the set. The 1" wide portion of the window frame

MUST be at the top. The window frame will overlap the vertical window support and will sit on top of the 2

x 4. On the rear of the frame the frame side flange will be flush to the vertical window support.

3: Place a 5/4 x 2-1/4" x 11-1/2" Horizontal Window Support under the window. The top of the board

should be flush to the bottom of the flange of the window. Fasten the support with #8 x 2" wood screws.

Place a 5/4 x 2-1/4" x 11-1/2" Horizontal Window Support over the window. The bottom of the board

should be flush to the top of the flange of the window. Fasten the support with #8 x 2" wood screws.

4: Place a 5/4 x 6 x 20" Vertical Window Support beside the horizontal window supports flush to the side of

the window. The bottom of the parts should be flush to one another. Fasten the support with #8 x 2"

wood screws.

5: Repeat substeps 2 through 4 for the other window.

107