Instructions / Assembly

STEP 61: SUN RAYS
1: All the sun ray pieces get installed to the inside surface of the Roof Supports and the
Sun piece.
2: Place the 5/4 x 2 x 17” Large Ray centered under the peak of the Roof Supports.
Attach the Large Ray to the Roof Support and Sun with two #8 x 1-1/2” wood screws.
3: Arrange six 5/4 x 2 x 13” Small Rays on either side of the Large ray (three small rays per
side) as shown below. Attach each Small Ray to the Roof Support and Sun with two #8
x 1-1/2” wood screws.
Roof
SupportSupport
5/4 x 2 x 17"
Large Ray
5/4 x 2 x 13"
Small Ray
#8 x 1-1/2"
Wood Screw
Roof
Sun
103