Instructions / Assembly

Wood Screw

#8 x 1-1/2"

1 x 5 x 18-3/8"

(7 per side)

Roof Board

Flush

Roof Starter

STEP 54: ROOF BOARDS

1: Place a 1 x 5 x 18-3/8" Roof Board on top of the roof supports. Place the tongue of

the roof board into the groove of the roof starter. Make the ends of the boards flush.

2: Fasten the Roof Board to the roof supports with #8 x 1-1/2" wood screws.

3: Repeat substeps 1-2 and install the remaining 6 Roof Boards.

4: Repeat substeps 1-3 to install 7 Roof Boards on the other side of the roof.