Instructions / Assembly

STEP 22: DRILLING CORNER POST HOLES

1: CHECK THE DIMENSION OF THE ROOF SUPPORT ASSEMBLIES AS SHOWN BELOW BEFORE

DRILLING HOLES.

2: MEASURE AS SHOWN BELOW AND MAKE MARKS ON THE CORNER POSTS ON THE INSIDE.

3: DRILL A 9/64" HOLE BY 2-1/2" DEEP AT EACH MARK.

4: REPEAT SUB STEPS 2-3 ON THE INSIDE OF THE OTHER POSTS AS POINTED OUT BELOW.

PROCESS ON THE INSIDE

OF THESE CORNER POSTS.

REPEAT THE

MEASURING/MARK/DRILL

33-3/8"

1-7/8"

200