Instructions / Assembly

5
1
2
"
STEP 13: BRIDGE RAILS
1: PLACE THE TOP SURFACE OF THE UPPER TWO 2 X 4 X 66" BRIDGE RAILS 5-1/2" BENEATH THE TOP SURFACE OF THE
TOP PANEL BOARD. THE COUNTERSUNK HOLE IN THE END OF THE BRIDGE RAIL SHOULD FACE THE INSIDE. FASTEN
THE BRIDGE RAIL TO THE CORNER POST WITH 5/16" X 3-1/2" LAG SCREWS WITH 5/16" WASHERS.
2: MEASURE 16" FROM THE TOP OF EACH BRIDGE RAIL AND MAKE A PENCIL MARK ON THE INSIDE OF THE CORNER
POSTS.
3: PLACE THE BOTTOM OF EACH LOWER 2 X 4 X 66" BRIDGE RAIL ON THE MARK ON THE CORNER POST. FASTEN
EACH BRIDGE RAIL TO THE CORNER POST WITH 5/16" X 3-1/2" LAG SCREWS WITH 5/16" WASHERS.
LAG SCREW
BRIDGE RAIL.
THE INSIDE)
BRIDGE RAIL
(COUNTERSUNK
B
FACE THE INSIDE IN
COUNTERSUNK HOLES
HOLES FACE
5/16" WASHER
A
5/16" X 3-1/2"
FOR CLARITY.
EACH END.
2 X 4 X 66"
TOP PANEL BOARD
NOTE: SOME BOARDS
HAVE BEEN OMITTED
FROM THE PICTURE
FRONT
OF
TOWER
D
16"
C
191