Manualshelf

Instructions / Assembly

ManualsBrandsGorilla Playsets ManualsPlayground Sets & EquipmentEmpire Extreme Cedar Swing Playset with Natural Cedar Posts
151152153154155156157158159160
LOWER LEVEL
ASSEMBLY REAR
ROOF SUPPORT
FRONT
SUPPORT ASSEMBLY
SUPPORT
WALL PANEL
SUPPORT
WALL PANEL
WALL PANEL BOARD
1 X 4 X 8.75"
WALL PANEL BOARD
1 X 4 X 12.25"
WALL PANEL BOARD
1 X 4 X 15.75"
WALL PANEL BOARD
1 X 4 X 19.31"
WOOD SCREW
1-1/2"
POST
CORNER
PLASTIC ARCH FROM
LOWER LEVEL ROOF
CORNER
POST
1
4
" GAP ALL BOARDS
1"
STEP 85: WALL PANEL BOARDS
1: START MOUNTING THE 1 X 4 X 19.31" WALL PANEL BOARD AGAINST THE LEFT SIDE OF THE LOWER LEVEL ROOF
SUPPORT ASSEMBLY REAR AND THE WALL PANEL SUPPORT LEFT. THE SIDE EDGE OF THE WALL PANEL BOARD MUST
BE PARALLEL AND 1/4" FROM THE SIDE EDGE OF THE FRONT LEFT CORNER POST. THE WALL PANEL BOARD BOTTOM
ANGLED END SHOULD BE PARALLEL AND 1" TO THE SIDE EDGE OF THE ROOF SUPPORT. FASTEN THE WALL PANEL
BOARD WITH FOUR 1-1/2" WOOD SCREWS.
2: MOUNT THE 1 X 4 X 15.75" WALL PANEL BOARD AGAINST THE LEFT SIDE OF THE LOWER LEVEL ROOF SUPPORT
ASSEMBLY REAR AND THE WALL PANEL SUPPORT LEFT. THE SIDE EDGE OF THE WALL PANEL BOARD MUST BE
PARALLEL AND 1/4" FROM THE SIDE EDGE OF THE PREVIOUS WALL PANEL BOARD. THE WALL PANEL BOARD
BOTTOM ANGLED END SHOULD BE PARALLEL AND 1" TO THE SIDE EDGE OF THE ROOF SUPPORT. FASTEN THE WALL
PANEL BOARD WITH FOUR 1-1/2" WOOD SCREWS.
3: MOUNT THE 1 X 4 X 12.25" WALL PANEL BOARD AGAINST THE LEFT SIDE OF THE LOWER LEVEL ROOF SUPPORT
ASSEMBLY REAR AND THE WALL PANEL SUPPORT LEFT. THE SIDE EDGE OF THE WALL PANEL BOARD MUST BE
PARALLEL AND 1/4" FROM THE SIDE EDGE OF THE PREVIOUS WALL PANEL BOARD. THE WALL PANEL BOARD
BOTTOM ANGLED END SHOULD BE PARALLEL AND 1" TO THE SIDE EDGE OF THE ROOF SUPPORT. FASTEN THE WALL
PANEL BOARD WITH FOUR 1-1/2" WOOD SCREWS.
4: MOUNT THE 1 X 4 X 8.75" WALL PANEL BOARD AGAINST THE LEFT SIDE OF THE LOWER LEVEL ROOF SUPPORT
ASSEMBLY REAR AND THE WALL PANEL SUPPORT LEFT. THE SIDE EDGE OF THE WALL PANEL BOARD MUST BE
PARALLEL AND 1/4" FROM THE SIDE EDGE OF THE PREVIOUS WALL PANEL BOARD. THE WALL PANEL BOARD
BOTTOM ANGLED END SHOULD BE PARALLEL AND 1" TO THE SIDE EDGE OF THE ROOF SUPPORT. FASTEN THE WALL
PANEL BOARD WITH FOUR 1-1/2" WOOD SCREWS.
5: REPEAT SUB-STEPS 1 TO 4 FOR THE OTHER SIDE.
149