Instructions / Assembly

3
4
"
STEP 26: LADDER TO FORT
1: PLACE THE LADDER INTO POSITION ON THE FRONT SIDE OF THE LOWER LEVEL FORT AS
SHOWN BELOW.CENTER THE LADDER HORIZONTALLY ON THE 2 X 6. CENTER THE 90 BRACKETS
VERTICALLY ON THE 2 X 6. USE THE HOLES IN THE LADDER BRACKETS AS A TEMPLATE TO DRILL
3/8" HOLES THROUGH THE BOTTOM PANEL BOARD.
2: FROM THE UNDERSIDE OF THE DECK INSERT A T-NUT INTO THE BACK SIDE OF THE 3/8" HOLES
ON THE BOTTOM PANEL BOARD.
3: ATTACH THE LADDER WITH 5/16" X 1-1/2" HEX BOLTS AND 5/16" WASHERS.
4: WHEN THE BRACKETS ARE SECURE AND THE LADDER IS IN ITS FINAL POSITION, TIGHTEN THE
5/16" X 1-1/2" BOLTS ON THE LADDER SIDES.
5/16" X 1-3/4" HEX BOLT
5/16" WASHER
T-NUTS
UNDER
DECK
IN HOLES
82