Instructions / Assembly

STEP 57: LOWER LEVEL PANEL SLATS
1: PLACE THE 5/4 X 3 X 28-1/4" PANEL SLATS INTO THE OPENINGS AS SHOWN BELOW. SPACE THE
SLATS AS INDICATED BY THE DIMENSIONS SHOWN. THERE ARE FIVE SLATS ON THE LEFT SIDE, FIVE
SLATS ON THE RIGHT SIDE AND TWO SLATS ON THE FRONT OF THE LOWER LEVEL.
2: PLACE EACH SLAT AS SHOWN BELOW ON THE INSIDE OF THE PANEL BOARDS AND ATTACH
EACH PANEL SLAT TO THE FORT WITH TWO #8 X 2" WOOD SCREWS.
LEFT SIDE
3
1
8
" SPACING
FLUSH
5/4 X 3 X 28-1/4"
PANEL SLAT
(ALIGN WITH
EDGE OF NOTCH)
#8 X 2" WOOD SCREW
RIGHT SIDE
3
1
8
" SPACING
FLUSH
114