Instructions / Assembly

5/16" X 4-1/2" HEX BOLT

5/16" WASHER

T-NUT

5/16" WASHER

2 X 6 X 70" SANDBOX BOARD

4 X 4 X 70" REAR TOP

PANEL BOARD

(OFFSET UP)

STEP 48: REAR TOP PANEL BOARD AND SANDBOX BOARD

1: FIND ONE 4 X 4 X 96" UPPER LEVEL CORNER POST AND PLACE IT BESIDE THE PREVIOUSLY

INSTALLED LAG POST.

2: USE A HAMMER TO SEAT THE T-NUTS AFTER INSERTING THEM INTO THE HOLES SHOWN IN

THE DIAGRAM BELOW.

3: CONNECT THE TWO UPPER LEVEL CORNER POSTS WITH ONE 2 X 4 X 70" REAR TOP

PANEL BOARD (OFFSET UP) AND FASTEN WITH 5/16" X 4-1/2" HEX BOLTS AND 5/16"

WASHERS.

4: ATTACH THE 2 X 6 X 70" SANDBOX BOARD (OFFSET HOLES DOWN) TO THE UPPER LEVEL

CORNER POSTS BOTTOM HOLES USING 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS.