Instructions / Assembly

STEP 47: PANEL BOARD AND SANDBOX BOARD
1: FIND ONE 4 X 4 X 96" UPPER LEVEL CORNER POST AND PLACE BEHIND THE PREVIOUSLY
INSTALLED CORNER POST.
2: USE A HAMMER TO SEAT THE T-NUTS AFTER INSERTING THEM INTO THE HOLES SHOWN IN THE
DIAGRAM BELOW.
3: CONNECT THE TWO UPPER LEVEL CORNER POSTS WITH ONE 2 X 4 X 30.625" PANEL/DECK
SUPPORT AND FASTEN WITH 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS.
4: ATTACH THE 2 X 6 X 30.625" SANDBOX BOARD (OFFSET HOLES UP) TO THE UPPER LEVEL
CORNER POSTS BOTTOM HOLES USING 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS.
UPPER LEVEL
CORNER POST
HEX BOLT
5/16" WASHER
T-NUT
T-NUT
5/16" X 4-1/2" HEX BOLT
5/16" WASHER
T-NUT
T-NUT
5/16" X 4-1/2"
/DECK SUPPORTPANEL
2 X 4 X 30.625"
2 X 6 X 30.625"
SANDBOX BOARD
85