Instructions / Assembly

B
STEP 69: TELESCOPE
1: USE THE 1-1/4" WOOD SCREWS PROVIDED WITH THE TELESCOPE TO FASTEN ONE OF THE
HALF-CIRCLE SHAPED TELESCOPE BRACKETS ON TOP OF THE CONNECTOR SUPPORT AS SHOWN
IN THE DIAGRAM BELOW.
2: PLACET THE TELESCOPE STAND AND TELESCOPE INTO THE SLOT OF THE TELESCOPE BRACKET.
3: FASTEN THE REMAINING HALF-CIRCLE SHAPED TELESCOPE BRACKET TO THE OPPOSITE SIDE
THAT THE FIRST TELESCOPE BRACKET WAS INSTALLED. USE THE 1-1/4" WOOD SCREWS PROVIDED
WITH THE TELESCOPE TO ATTACH THE TELESCOPE BRACKET.
TELESCOPE
PROVIDED WITH TELESCOPE
SCALE 1 : 4
DETAIL B
1-1/4" WOOD SCREWS
HALF CIRCLE TELESCOPE BRACKET
CONNECTOR SUPPORT
108