Instructions / Assembly

SUPPORT
ROOF PEAK
STEP 61: ROOF SUPPORT ASSEMBLIES
FLUSH WHERE SHOWN BELOW. FASTEN USING TWO #8 X 2-1/2" AND SIX #8 X 2" WOOD SCREWS
. PLACE ONE PLASTIC SUNBURST ON TOP OF THE ROOF SUPPORTS. THE EDGES SHOULD BE
AS SHOWN BELOW.
1: LOCATE TWO 2 X 4 X 51.125" ROOF SUPPORT (LEFT), TWO 2 X 4 X 51.125" ROOF SUPPORT
(RIGHT), TWO 5/4 X 6 X 10" ROOF PEAK SUPPORT PIECES AND TWO PLASTIC SUNBURST PIECES.
2: FIND A FLAT SURFACE TO WORK ON. LAY THE ROOF SUPPORTS DOWN ON THE FLAT SURFACE
WITH COUNTERSUNK HOLES FACING UP. ALIGN THE ANGLED ENDS OF THE ROOF SUPPORTS
FLUSH WITH ONE ANOTHER. PLACE A ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS.
THE EDGES SHOULD BE FLUSH WHERE SHOWN BELOW. FASTEN USING #8 X 2" WOOD SCREWS .
3: LAY THE ROOF SUPPORTS DOWN ON THE FLAT SURFACE WITH COUNTERSUNK HOLES FACING
DOWN
5/4 X 6 X 10"
#8 X 2" WOOD SCREW
2 X 4 X 51.125"
ROOF SUPPORT
(LEFT)
2 X 4 X 51.125"
ROOF SUPPORT
(RIGHT)
(RIGHT)
#8 X 2" WOOD SCREWS 2 X 4 X 51.125" ROOF SUPPORT
PLASTIC SUNBURST
#8 X 2-1/2" WOOD SCREWS
2 X 4 X 51.125"
ROOF SUPPORT
(LEFT)
2 X 4 X 51.125" ROOF SUPPORT (RIGHT)
2 X 4 X 51.125" ROOF SUPPORT (LEFT)
100