Instructions / Assembly

DECK SUPPORT

UPPER LEVEL

ANGLE SUPPORT

#8 X 2-1/2" WOOD SCREW (4)

#8 X 2" WOOD SCREW

DETAIL B

SCALE 1 : 12

#8 X 3" WOOD SCREW

SWING SIDE

2 X 4 X 21-1/2"

TOPS FLUSH

1: (SEE DETAIL A) PLACE THE 2 X 4 X 18" ANGLE SUPPORT UPPER LEVEL RAD RIDE SIDE UNDER THE 4 X 4 X 23-

1/2" SLIDE BLOCK ON THE LEFT SIDE OF THE FORT. THE ANGLE SUPPORT SHOULD BE FLUSH TO THE LEFT SIDE

OF THE LEFT REAR CORNER POST. ATTACH THE ANGLE SUPPORT AT THE TOP AND AT THE BOTTOM WITH ONE

#8 X 2" WOOD SCREW AND ONE #8 X 3" WOOD SCREW.

2: (SEE DETAIL B) PLACE THE 2 X 4 X 21-1/2" ANGLE SUPPORT UPPER LEVEL SWING SIDE AGAINST THE 2 X 4 X

34" UPPER LEVEL DECK SUPPORT ON THE RIGHT SIDE OF THE FORT. THE TOP OF THE ANGLE SUPPORT

SHOULD BE FLUSH TO THE TOP OF THE DECK SUPPORT. FASTEN THE TOP OF THE ANGLE SUPPORT TO THE

DECK SUPPORT WITH FOUR #8 X 2-1/2" WOOD SCREWS. FASTEN THE BOTTOM OF THE ANGLE SUPPORT TO

THE RIGHT REAR CORNER POST WITH ONE #8 X 2" WOOD SCREW AND ONE #8 X 3" WOOD SCREW.

STEP 30: SIDE REAR ANGLE SUPPORTS

RIGHT SIDE

OF FORT

LEFT SIDE OF FORT

#8 X 3" WOOD SCREW

UPPER LEVEL

DETAIL A

SCALE 1 : 14

RAD RIDE SIDE

#8 X 2" WOOD SCREW

2 X 4 X 18"

ANGLE SUPPORT

SLIDE

BLOCK