Instructions / Assembly

ManualsBrandsGorilla Playsets ManualsParks, Playsets & PlayhousesMalibu Treasure Trove I with Timber Shield Cedar Playset

STEP 9: ANGLE SUPPORTS

1: FOUR 2 X 4 X 13" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE LEFT AND

RIGHT SIDES OF THE PLAY SET TO THE 2 X 6 BOTTOM PANEL BOARDS. THE TOP OF THE

ANGLE SUPPORT SHOULD BE FLUSH OR LOWER THAN THE TOP OF THE DECK SUPPORT.

2: AT THE TOP USE 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE ANGLE

SUPPORT. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE ANGLE

SUPPORT TO THE CORNER POST.

3: FOUR 2 X 4 X 18" ANGLE SUPPORTS ARE MOUNTED UNDER THE DECK ON THE FRONT

AND REAR OF THE PLAY SET TO THE 2 X 4 DECK SUPPORTS. THE TOP OF THE ANGLE

SUPPORT SHOULD BE FLUSH OR LOWER THAN THE TOP OF THE DECK SUPPORT.

4: AT THE TOP USE TWO 2-1/2" WOOD SCREWS THROUGH THE DECK SUPPORT INTO THE

ANGLE SUPPORT. AT THE BOTTOM USE ONE 2" AND ONE 3" WOOD SCREW TO FASTEN THE

ANGLE SUPPORT TO THE CORNER POST.

SUPPORT

3" WOOD

SCREW

2 X 4 X 18"

SUPPORT

WOOD

SCREW

ANGLE

2 X 4 X 13"

SUPPORT

ANGLE

SCREW

3" WOOD

DECK

2" WOOD

SCREW

2" WOOD

SCREW

2-1/2"

2 X 6

BOTTOM

PANEL

BOARD

BOTTOM

PANEL

2 X 4 X 13"

DETAIL A

ANGLE

SUPPORT

SCALE 1 : 8

2 X 4 X 18"

ANGLE

THAN THE DECK SUPPORT

SHOULD BE FLUSH OR LOWER

TOP OF ANGLE SUPPORTS

2 X 6

2 X 4

DECK

SUPPORT

13"

18"

13"