Instructions / Assembly

33
7
16
"
USE 1-7/8"
FOR GREEN POSTS.
1"
16
POSTS.
"
STAINED
1
13
33
3
8
"
REPEAT THE
MEASURE/MARK/DRILL
PROCESS ON THE
INSIDE OF THESE
CORNER POSTS.
STEP 22: DRILLING CORNER POST HOLES
1: CHECK THE DIMENSION OF THE ROOF SUPPORT ASSEMBLIES AS SHOWN BELOW BEFORE
DRILLING HOLES.
2: MEASURE AS SHOWN BELOW AND MAKE MARKS ON THE CORNER POSTS ON THE INSIDE.
3: DRILL A 9/64" HOLE BY 2-1/2" DEEP AT EACH MARK.
4" REPEAT SUBSTEPS 2-3 ON THE INSIDE OF THE OTHER POSTS
AS POINTED OUT BELOW.
161