Instructions / Assembly

STEP 21: ROOF SUPPORT ASSEMBLIES

1: LOCATE FOUR 2 X 4 X 51-1/8" ROOF SUPPORT (LEFT), FOUR 2 X 4 X 51-1/8" ROOF SUPPORT (RIGHT) AND FOUR 5/4

X 6 X 10" ROOF PEAK SUPPORT PIECES.

2: FIND A FLAT SURFACE TO WORK ON. LAY THE ROOF SUPPORTS DOWN ON THE FLAT SURFACE WITH THE

COUNTERSUNK HOLES FACING DOWN. ALIGN THE ANGLED ENDS OF THE ROOF SUPPORTS FLUSH WITH ONE

ANOTHER. PLACE A ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS AS SHOWN. THE EDGES SHOULD BE

FLUSH WHERE SHOWN BELOW.

3: USE FOUR #8 X 2" WOOD SCREWS TO ATTACH THE ROOF PEAK SUPPORT TO THE ROOF SUPPORTS AS SHOWN

BELOW.

4: MAKE ONE MORE ROOF SUPPORT ASSEMBLY BY REPEATING 2 AND 3.

DETAIL A

SCALE 1 : 3

FLUSH

#8 X 2"

WOOD SCREW

FLUSH

2 X 4 X 27"

SUPPORT

ROOF SUPPORT - LEFT

ROOF SUPPORT - RIGHT

SUPPORT ASSEMBLY

(MAKE 2)

COUNTERSUNK HOLE FACES DOWN

2 X 4 X 27"

5/4 X 6 X 10"

ROOF PEAK

COMPLETED ROOF

160