Instructions / Assembly

2 X 4 X 51-1/8"

ROOF SUPPORT - LEFT

2 X 4 X 51-1/8"

ROOF SUPPORT - RIGHT

5/4 X 6 X 10"

ROOF PEAK SUPPORT

COUNTERSUNK HOLE FACES UP

SCREW

WOOD

#8 X 2"

DETAIL A

FLUSH

1: LOCATE TWO 2 X 4 X 51-1/8" ROOF SUPPORT (LEFT), TWO 2 X 4 X 51-1/8" ROOF SUPPORT

(RIGHT) AND TWO 5/4 X 6 X 10" ROOF PEAK SUPPORT PIECES.

2: FIND A FLAT SURFACE TO WORK ON. LAY THE ROOF SUPPORTS DOWN ON THE FLAT SURFACE

WITH THE COUNTERSUNK HOLES FACING UP. ALIGN THE ANGLED ENDS OF THE ROOF SUPPORTS

FLUSH WITH ONE ANOTHER. PLACE A ROOF PEAK SUPPORT ON TOP OF THE ROOF SUPPORTS

AS SHOWN. THE EDGES SHOULD BE FLUSH WHERE SHOWN BELOW.

3: USE FOUR #8 X 2" WOOD SCREWS TO ATTACH THE ROOF PEAK SUPPORT TO THE ROOF

SUPPORTS AS SHOWN BELOW.

4: MAKE ONE MORE ROOF SUPPORT ASSEMBLY BY REPEATING 2 AND 3.

STEP 52: ROOF SUPPORT ASSEMBLIES

TIPS FLUSH

104