Instructions / Assembly

(RIGHT SIDE)

(OFFSET DOWN)

2 X 4 X 30-7/16"

SIDE TOP PANEL BOARD

5/16" WASHER

HEX BOLT

5/16" X 4-1/2"

HEX BOLT

5/16" X 4-1/2"

4 X 4 X 120

CORNER POST

HEX BOLT

(LEFT SIDE)

5/16" X 4-1/2"

WASHER

5/16" WASHER

5/16"

2 X 4 X 34"

UPPER LEVEL

DECK SUPPORT

2 X 4 X 30-7/16"

SIDE TOP PANEL BOARD

(OFFSET DOWN)

STEP 23: REAR CORNER POSTS & DECK SUPPORTS &

SIDE TOP PANEL BOARDS

TIP: BEFORE YOU INSTALL THESE BOARDS LEAVE THEM ALL A LITTLE LOOSE. WHEN YOU HAVE FASTENERS IN ALL THE

BOARDS GO BACK AND TIGHTEN THEM ALL UP.

1: ATTACH THE BOTTOM OF THE REAR CORNER POSTS TO THE SIDE SANDBOX BOARDS WITH 5/16" X 4-1/2" HEX

BOLTS AND 5/16" WASHERS.

2: PLACE THE 2 X 4 X 30-7/16" SIDE TOP PANEL BOARDS (OFFSET DOWN) AT THE TOP OF THE CORNER POSTS ON

THE SIDES OF THE FORT. USE 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH EACH SIDE TOP PANEL

BOARD TO THE LAG/CORNER POSTS.

3: PLACE THE 2 X 4 X 34" UPPER LEVEL DECK SUPPORTS ON THE INSIDE OF THE LAG/CORNER POSTS. ATTACH EACH

UPPER LEVEL DECK SUPPORT WITH 5/16" X 4-1/2" HEX BOLTS AND 5/16" WASHERS.

4: TIGHTEN ALL THE FASTENERS.